Remove/install rear engine support

AR22.10-D-4360TSC

Remove/install rear engine support

16.07.2019

Engine

274 in model 907

Modification notes

15.07.2019

Reference link changed

Operation step 1

4

Engine support

5

Bolts

6

Bolts

7

Engine mount

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 

Remove/install

1

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

2

Lift transmission with major assembly mount and mounting plate until engine mount (7) is relieved.



000 588 11 62 00 Major assembly mount

WS01.00-P-0092B



000 588 10 62 00 Support plate

WS26.00-P-3309B


Carefully lift transmission.
Otherwise damage to the transmission may occur.

 Underlay with suitable wooden blocks.

3

Remove screw/bolts (6).

 Bolt, rear engine mount to rear engine support

*BA22.10-N-1003-01TSR

4

Unscrew screws (5) and remove engine carrier (4).

 Screw/bolt, rear engine support to longitudinal member

*BA22.10-N-1002-01TSR

5

Install in the reverse order

 Engine mounts, engine supports

Number

Designation

Engine 274 in model 907

BA22.10-N-1002-01TSR

Screw/bolt, rear engine support to longitudinal member

Nm

58

 Engine mounts, engine supports

Number

Designation

Engine 274 in model 907

BA22.10-N-1003-01TSR

Bolt, rear engine mount to rear engine support

M8

Nm

30

M10

Nm

58