Remove/install rear engine cross member · ar2210d1170we · Mercedes-Benz WIS

AR22.10-D-1170WE

Remove/install rear engine cross member

21.12.11

ENGINES 651 in MODEL 900

ENGINES 651.955 /956 /957 in MODEL 906

Shown on model 906 with transmission 722.6

1 Transmission jack

2 Wooden block

3 Oil pan

D22.10-1126-03

D22.10-1127-08

Shown on model 906 with
transmission 722.6

4 Engine crossmember

5 Screw/bolts

8 Rear engine mount

6 Screw/bolts

7 Screw/bolt

 	Remove/install
1	Lift/jack up vehicle		AR00.60-D-1000H
2	Lift transmission with transmission jack (1) until the rear engine mount (8) is relieved of load	 Place suitable wooden block (2) between transmission and transmission jack (1).
		Transmission jack gotis://H_00.10_01.0
3	Mark installation position of engine crossmember (4)	 The mounting holes are arranged asymmetrically.
4	Remove screw/bolts (7)		*BA22.10-N-1008-01S
5	Remove screw/bolts (5) and remove engine crossmember (4)	 Installation: Observe marking on the engine crossmember (4).
			*BA22.10-N-1003-01S
6	Mark installed position of rear engine mount (8) relative to the engine crossmember (4)	 When replacing rear engine mount (8).
7	Unscrew screw/bolts (6) and remove rear engine mount (8)	 When replacing rear engine mount (8) or the engine crossmember (4).
		 Installation: Transfer marking on the new engine crossmember (4).
			*BA22.10-N-1002-01S
8	Install in the reverse order

 Engine mounts, engine supports

Number	Designation			Engine 651


BA22.10-N-1002-01S	Screw/bolt, rear engine mount to rear engine crossmember	M8	Nm	30
		M10	Nm	58
BA22.10-N-1003-01S	Screw/bolt, transmission carrier to frame-type integral support		Nm	58
BA22.10-N-1008-01S	Screw/bolt, rear engine mount to holder		Nm	40