AR22.10-D-1100NA | Removing and installing engine mount | 16.1.01 |
ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
D22.10-1105-08
Shown on engine 612.981
1 Nut
2 Washer
3 Stop plate
8 Screw
9 Right engine support
10 Ground cable
11 Engine lifting device
4 Engine mount
5 Left engine support
6 Bracket
7 Washer
| Remove/Install | ||
1 | Remove heat shield above turbocharger | ||
2 | Raise engine | Raise engine until the engine mounts (4) no longer bear the weight of the engine. | |
Installation: When lowering the engine, place the left engine support (5) and the right engine support (9) on the engine mount (4). Insert bolts (8) and tighten by hand. Then, lower engine fully and tighten bolts (8) to final torque. | |||
| |||
| |||
3 | Unscrew nuts (1) and take off engine mount (4) together with stop plate (3) | | |
4 | Install in the reverse order |
Engine mounts, engine supports
Number | Designation | Engine 612.981 | Engine 647.981 | |
BA22.10-N-1001-01L | Screw for engine mount on front axle | Nm | 45 | 45 |
BA22.10-N-1002-01L | Bolt of engine support to front engine mount | Nm | 83 | 83 |
Workshop equipment
WE58.40-Z-1007-11A | Engine lifting fixture |