ar2040t0300aa

Removing/installing the hydrostatic fan drive - filter bowl

Type ar · emne 20.40 · version 0100 · 2005-07-12

Gælder for: ENGINE 457.942 in MODELS NMB671.015 /020 /021 /030 /042 /332 /333

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 20 Motorkøling › 20.40 Ventilator, ventilatorkobling — Serie 671 (modeller 015, 020, 021, 030, 042, 332, 333)

EinPAS 15 Motor › 15.25 Motorkølesystem › 15.25.45 ventilator/ventilatorkobling/ventilatordrev — Serie 671 (modeller 015, 020, 021, 030, 042, 332, 333)

Gælder også for motorer/gearkasser: 457 942

AR20.40-T-0300AA

Removing/installing the hydrostatic fan drive - filter bowl

29.10.03

ENGINE 457.942 in MODELS NMB671.015 /020 /021 /030 /042 /332 /333

Removing/installing the hydrostatic fan drive - filter bowl

T20.40-0037-11

Illustrated on model 671.042

1 Bolt

2 Hydraulic line

3 Filter housing

4 Bracket

5 Bolt

Removing/installing

Danger!

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning caused by swallowing hydraulic fluid.

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

1

Drain hydraulic fluid and unscrew filter cartridge

Hydrostatic fan drive - oil and filter change

AP20.40-T-2001AA

2

Remove bolts (1)

3

Remove hydraulic lines (2) from filter bowl (3)

Collect hydraulic fluid in a suitable container. Observe the disposal regulations.

4

Unscrew bolts (5).

5

Remove filter bowl (3) from bracket (4)

6

Install in reverse order

Henviste dokumenter