P20.40-2121-09
1 Intake air duct
2 Connector
3 Fan shroud
7 Clamping spring
8 Clamping spring
17 Coolant hose
4 Expanding rivet
5 Expanding rivet
6 Radiator
P20.40-2122-07
3 Fan shroud
9 Coolant line
10 Bracket
14 Lower mount at the radiator
15 Retaining tab of the fan shroud
16 Retaining tab of the fan shroud
11 Bracket
12 Bracket
13 Lower mount at the radiator
P20.40-2104-01
3 Fan shroud
| Remove/install | ||
1 | Remove left and right intake air duct (1) | ||
2 | Remove upper radiator crossmember | Engine 273 in model 211 | |
Engine 273 in model 219 | |||
3 | Remove plug (2) from fan shroud (3) | ||
4 | Detach expansion rivets (4, 5) of upper mounts of radiator (6) | ||
5 | Tilt radiator (6) at top against direction of travel (arrow) | ||
6 | Detach clamping springs(7, 8) | ||
7 | Unclip coolant lines (9) on left and right from brackets (10, 11, 12) at fan shroud (3) | ||
8 | Remove fan shroud (3) from lower mounts (13, 14) of radiator (6) | While removing the an shroud (3) ensure that coolant hose (17) does not buckle. | |
Installation: Ensure correct position of retaining tabs (15, 16) of fan shroud (3) in lower mounts (13, 14) of radiator (6). | |||
9 | Install in the reverse order |