ar2040d5614ae

Remove/install fan

Type ar · emne 20.40 · version 0101 · 2009-09-18

Gælder for: ENGINE 900.917 /918 in MODEL 668, 670

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 20 Motorkøling › 20.40 Ventilator, ventilatorkobling — Serie 668 · Serie 670 · Serie 900 (modeller 917, 918)

EinPAS 15 Motor › 15.25 Motorkølesystem › 15.25.45 ventilator/ventilatorkobling/ventilatordrev — Serie 668 · Serie 670 · Serie 900 (modeller 917, 918)

AR20.40-D-5614AE

Remove/install fan

11.9.09

ENGINE 900.917 /918 in MODEL 668, 670

Remove/install fan

D20.40-1006-06

1 Fan

2 Viscous fan clutch

3 Bolt

 	Remove/install
1	Remove plate under front grille		AR88.00-D-2200A
2	Remove front bumper	 Observe connector on outside temperature sensor, on the left on bumper.
3	Detach radiator unit and pull to the front	 Installation: Align radiator unit.	AR20.20-D-3860-09AD
4	Remove bolts (3) and fan (1) from viscous fan clutch (2)		*BA20.40-N-1002-01G
5	Install in the reverse order
6	Check gap; adjust if necessary	Gap width engine hood to front-end paneling	*BE88.40-N-1001-01B
		Height offset, engine hood to front-end paneling	*BE88.40-N-1002-01B
		Ridge offset, engine hood to front-end paneling	*BE88.40-N-1003-01B

Check values for engine hood

Number	Designation		Model 667, 668, 670


BE88.40-N-1001-01B	Gap width engine hood to front-end paneling	mm	61
BE88.40-N-1002-01B	Height offset, engine hood to front-end paneling	mm	0+1
BE88.40-N-1003-01B	Ridge offset, engine hood to front-end paneling	mm	02

 Fan, fan clutch

Number	Designation		Engine 900.917/918 in model 668, 670


BA20.40-N-1002-01G	Fan on fan clutch	Nm	10

Henviste dokumenter