Remove/install low-temperature circuit radiator in wheel arch

AR20.20-P-3876MNA

Remove/install low-temperature circuit radiator in wheel arch

20.11.2019

Engine

177 in model 205

Modification notes

12.05.2016

Bolt/nut, wheel arch radiator to bracket

Engine 177

BA20.20-P-1003-01Q

20.11.2019

Bolt/nut, wheel arch radiator to bracket

Engine 177 except in model 463

BA20.20-P-1003-01Q

1

Coolant hose

2

Nuts

3

Screw

4

Screw

5

Guide frame

6

Air duct insert

7

Radiator low-temperature circuit

8

Coolant hose

9

Screw

 

Remove/install

1

Detach left front wheel

AR40.10-P-1102A

2

Remove left front fender liner

AR88.10-P-1300LW

3

Drain coolant from low-temperature circuit

AR09.41-P-6834MNA

4

Detach lower coolant hose (1)

AR20.20-P-7441-01RQ

5

Unscrew nuts (2)

 Bolt/nut, wheel arch radiator to bracket

*BA20.20-P-1003-01Q

6

Remove screw/bolts (3, 4) at front bumper

AR88.20-P-2000LW

7

Remove screw/bolt (9) of front bumper on bracket on front carrier module

AR88.20-P-2000LW

8

Tip low-temperature circuit cooler (7) downstream of rear and upper coolant hose (8)

AR20.20-P-7441-01RQ

9

Push low-temperature circuit cooler (7) from guide frame (5) and remove downwards

10

Unclip both air duct inserts (6) on low-temperature circuit radiator (7)

When replacing the low-temperature circuit radiator (7)

11

Install in the reverse order

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

12

Perform an engine test run and check engine for proper function

 Radiator, coolant hoses

Number

Designation

Engine 177 except in model 463

BA20.20-P-1003-01Q

Bolt/nut, wheel arch radiator to bracket

Nm

8