P20.10-2340-08
1 Electrical connector
2 Vacuum hoses
Y133 Coolant pump switchover valve
3 Retaining tab
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Remove engine trim panel | ||
2 | Remove poly-V belt cover | Detach cover for upper belt drive cover to the front and upwards. | |
3 | Disconnect electrical connector (1) on the coolant pump switchover valve (Y133) | ||
4 | Detach vacuum hoses (2) | ||
5 | Release and detach coolant pump switchover valve (Y133) on retaining tab (3) | ||
6 | Install in the reverse order |
Henviste dokumenter
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.