ar1840y411301a

Checking oil dipstick

Type ar · emne 18.40 · version 0101 · 2019-10-21

Gælder for: Engine 400.925/926/927/928 in model 831.001/002/005

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 18 Motorsmøring, motoroliekøling › 18.40 Oliestands-, olietrykføler — Serie 400 (modeller 925, 926, 927, 928) · Serie 831 (modeller 001, 002, 005)

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.43 Bundkar/påfyldningsstuds — Serie 400 (modeller 925, 926, 927, 928) · Serie 831 (modeller 001, 002, 005)

AR18.40-Y-4113-01A

Checking oil dipstick

Drain engine oil at drain plug

AR18.00-Y-3035-04B

Engine

400.925/926/927/928 in model 831.001/002/005

Engine oil

Number

Designation

Engine 400.925/926/927/928 in model 831.001/002/005

BF18.00-Y-1001-01B

Engine oil (Filling quantity)

Litre

11

Sheet

BB00.40-P-0228-01A

Checking oil dipstick

Engine oil checking procedure

A

Oil dipstick

B

Minimum level

C

Maximum level

Y18.20-0010-01

1

Park the vehicle on a ground level surface.

2

Verify the transmission is still in neutral position.

3

Engine starts and allow it to idle for 30 seconds.

4

Stop the engine and inspect for leaks.

Wait at least 15 seconds before removing the oil dipstick.

5

Remove the oil dipstick from the oil dipstick tube and wipe it dry with a clean cloth.

6

Re-install the oil dipstick to the oil dipstick tube completely seated.

7

Remove the oil dipstick and check the oil level. 

If the oil level is lower than 'Maximum' (C) mark,

add recommended oil as necessary to bring the level near the 'Maximum' (C) mark on the dipstick.

8

Maintain oil level between Minimum (B) and Maximum (C) range, do not overfill.

9

Re-install the oil dipstick to the oil dipstick tube completely seated.