AR18.40-W-4133J | Remove/install oil pressure/oil temperature sensor | 5.7.10 |
ENGINES 926.9## ## up to 301561 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2
W18.40-1012-02
1 Electrical connector
2 Oil filter cover
B110 Oil pressure and oil temperature combination sensor
| Remove/install | ||
1 | Switch off ignition | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut. | |
2 | Tilt cab | Installation: Only tilt cab back after leak test has been conducted. | |
| Notes on tilting the cab | ||
3 | Remove soundproofing on frame above on the right | ||
4 | Unscrew oil filter cover (2) and remove | The engine oil flows back into the oil pan when the oil filter cover (2) is unscrewed. | |
Installation: Replace O-ring for oil filter cover (2) and check oil filter element for damage and soiling; replace oil filter element if necessary. | |||
| |||
5 | Disconnect electrical connector (1) | ||
6 | Remove oil pressure and oil temperature combination sensor (B110) | Collect engine oil that flows out. | |
| |||
7 | Install in the reverse order | ||
8 | Check engine oil level at display; correct if necessary | Observe engine oil grade set in maintenance system or Specifications for Operating Fluids. | |
| Notes on engine oil | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
9 | Start engine and allow to run in idle for 10 s until the oil pressure has built up, then run the engine at varying speeds | ||
10 | Switch off engine and check area of the oil pressure and oil temperature combination sensor (B110) for leaks | Visual inspection. |
Oil filter
Number | Designation | Engine 924.9, 925.9, 926.9 | |
BA18.20-N-1003-01B | Oil filter cover to oil filter housing | Nm | 25 |
Oil level sensor, oil pressure sensor
Henviste dokumenter
- ah1800n010101b Oplysninger om motorolie
- ah6080n000301a Oplysninger om tipning af førerhus
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes