Remove/install engine oil fill level sensor

AR18.40-P-5116MNM

Remove/install engine oil fill level sensor

19.10.2017

Engine

177 in model 217, 222

1

Bolts

2

Electrical connector

B40

Oil sensor (oil level, temperature and quality)

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Drain engine oil



AP18.00-P-0101DD

 Installation: Do not install lower center engine compartment lining until after leak test.

2

Release and disconnect electrical connection (2)

3

Unscrew screws/bolts (1) and remove oil sensor (oil level, temperature and quality) (B40) downwards

 Bolt, fill level sensor to oil pan

*BA18.40-P-1002-02D

4

Install in the reverse order

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Perform an engine test run and check engine for proper operation and leaktightness

6

Install lower center engine compartment lining

AR61.20-P-1105LF

 Oil sensor

Number

Designation

Engine 177

BA18.40-P-1002-02D

Bolt, fill level sensor to oil pan

Nm

8