Removing and installing the oil pressure sensor

Type ar · emne 18.40 · version 0101 · 1999-10-22

Gælder for: ENGINE 111.979 in MODEL 901, 902, 903, 904

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 18 Motorsmøring, motoroliekøling › 18.40 Oliestands-, olietrykføler — Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.12 Sensor/kontakt/ledningssæt — Serie 901 · Serie 902 · Serie 903 · Serie 904

Gælder også for motorer/gearkasser: 111 979

AR18.40-D-4132C

Removing and installing the oil pressure sensor

14.2.96

ENGINE 111.979 in MODEL 901, 902, 903, 904

D18.40-1000-11

1 Connector of oil pressure switch

2 Oil pressure switch

 	Removing, installing
1	Switch off ignition
2	Unplug connector of oil pressure switch (1)
3	Remove oil pressure switch (2)	  Seal is captive-type. If leak exists, replace oil pressure switch (2).	*BA18.40-N-1002-01A
4	Install in the reverse order

 Oil level, oil pressure sensor

Number	Designation		Engine 111.979/ 984


BA18.40-N-1002-01A	Oil pressure switch to crankcase	Nm	20