ar1830d684001d
Remove/attach oil water heat exchanger
Type ar · emne 18.30 · version 0111 · 2006-02-10
Gælder for: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 18 Motorsmøring, motoroliekøling › 18.30 Oliekøling — Serie 668 · Serie 670 · Serie 904 (modeller 904, 908, 914, 923, 936)
EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.31 filter/køling/termostat/ventilator/beholder — Serie 668 · Serie 670 · Serie 904 (modeller 904, 908, 914, 923, 936)
AR18.30-D-6840-01D
| Remove/attach oil water heat exchanger
|
|
|
Number
| Designation
| Engines
900.9, 902.9, 904.9, 906.9
|
|
|
|
|
|
|
|
|
|
|
BA18.30-N-1001-01C
| Bolt, oil-water heat exchanger to crankcase
| Nm
| 25
|
1 Remove bolts (3) and oil water heat exchanger (1) at crankcase .
Do not remove bolt (1.1).
Collect coolant and engine oil that flows out.
Installation: Observe tightening torque.
2 Take off gasket (2) at oil-water heat exchanger (1)
Installation: Replace gasket (2).
3 Install in the reverse order.
