Remove/install oil spray nozzles (pistons)

AR18.00-T-4000BB

3.7.01

ENGINE 457.941 in MODELNMB613.368

ENGINE 457.942 in MODEL NMB671.015 /020 /021 /030 /042 /332 /333

ENGINE 457.944 in MODEL NMB613.358 /367 /388

T18.00-0014-06

1 Oil spray nozzle

2 Banjo bolt

 	Remove/Install
1	Remove bottom engine compartment paneling	Model 613.358/388	AR61.20-T-1105B
		Model 613.367/368	AR61.20-T-1105CA
		Model 671.015/020/021/030/042/332/333	AR61.20-T-1105AA
2	Remove oil pan	Model 613.358/367/368/388	AR01.45-T-7500BA
		Model 671.015/020/021/030/042/332/333	AR01.45-T-7500AA
3	Attach cranking device for engine	The engine must not be started so long as the cranking device is still attached.	AR03.30-T-1600-03BB
			*BA01.60-N-1001-01H
			*407589006300
4	Rotate crankshaft until the oil spray nozzle (1) to be removed, is accessible
5	Unscrew banjo bolt (2) and remove oil spray nozzle (1)	Inspect oil spray nozzle for clear passage.
		 Installation: The dowel pin (arrow) must be seated in the hole in the crankcase to ensure correct seating of the oil spray nozzle.
			*BA18.00-N-1001-01G
6	Install in the reverse order

 Timing case

Number	Designation		Engine 457.9


BA01.60-N-1001-01H	Bolt of end cover of inspection hole to timing case	Nm	25

Engine lubrication, engine oil cooling general

Number	Designation		Engine 457.9


BA18.00-N-1001-01G	Banjo bolt of oil spray nozzle (piston cooling) to crankcase	Nm	40

Cranking device

407 589 00 63 00