ar1545t1000a

Removing, installing flame starting system

Type ar · emne 15.45 · version 0100 · 2005-07-12

Gælder for: ENGINE 447, 489

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 15 El-system motor › 15.45 Glødeanlæg — Serie 447

EinPAS 15 Motor › 15.36 Koldstarthjælp/glødesystem › 15.36.1 Grundinformation — Serie 447

Gælder også for motorer/gearkasser: 489 ***

AR15.45-T-1000A

Removing, installing flame starting system

15.5.98

ENGINE 447, 489

Removing, installing flame starting system

T15.45-0002-06

1 Electrical connection to solenoid valve

2 Electrical connection to glow plug

3 Fuel line to solenoid valve

4 Flange of flame starting system

Removing, installing

1

Switch off ignition

2

Open service flap at rear left and also engine compartment flap

3

Remove charge air pipe

AR09.41-T-1311A

4

Separate electrical connection to solenoid valve (1)

5

Separate electrical connection to glow plug (2)

Danger!

Risk of explosion as a result of fuel vapors igniting. Risk of poisoning as a result of inhaling fuel vapors. Risk of injury as a result of fuel coming into contact with skin and eyes.

No fire, naked flame or smoking.
Pour fuels only into suitable and appropriate marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

6

Unbolt fuel line at solenoid valve (3)

7

Detach flange from flame starting system (4)

8

Take flame starting system out of intake manifold

9

Install in the reverse order

Henviste dokumenter