ar1540w5032r

Remove/install alternator

Type ar · emne 15.40 · version 0101 · 2010-07-06

Gælder for: ENGINES 926.9 in MODEL 949 except CODE (Z90) Vehicle, capable of fording up to 1195 mm ENGINES 926.9 in MODEL 949 except CODE (Z69) Vehicle, capable of fording up to 1500 mm

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 15 El-system motor › 15.40 Generator — Serie 949

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.30 Generator — Serie 949

Gælder også for motorer/gearkasser: 926 9**

AR15.40-W-5032R

Remove/install alternator

5.7.10

ENGINES 926.9 in MODEL 949 except CODE (Z90) Vehicle, capable of fording up to 1195 mm

ENGINES 926.9 in MODEL 949 except CODE (Z69) Vehicle, capable of fording up to 1500 mm

Remove/install alternator

W15.40-1090-09

1 Air filter

2 Electric cable (red)

3 Electrical connector

4 Ground line (brown)

7 Carrier

8 Poly-V-belt

G2 Generator

5 Electrical lines (only on vehicles with code (M90) Electrical charge air preheating system)

6 Bracket

Remove/install alternator

W15.40-1091-11

Illustrated on vehicle with Code (H03) Air conditioning in front and engine with detached fan

8 Poly-V-belt

9 Breaker bar and socket

10 Poly-V belt tensioning device

11 Belt pulley

G2 Generator

Arrow: Pivot direction

Remove/install

1

Disconnect ground lead from battery

AR54.10-W-0003A

2

Open engine hood and raise to vertical position

AR88.40-W-1000R

3

Remove air filter (1)

AR09.10-W-1050R

4

Push poly-V-belt tensioning device (10) in pivoting direction (arrow) with breaker bar and socket (9) and remove poly-V-belt (8)

Installation: Inspect condition of poly-V belt (8), replace if necessary.

Observe poly-V belt (8) routing diagram.

AR13.22-W-3902-02B

Damage profiles for a poly-V belt

AP13.22-D-1351-01A

5

Cut cable ties on electrical lines (5) on alternator (G2) and push electrical lines (5) to side.

Only on vehicles with code (M90) Electrical charge air preheating system

6

Disconnect ground line (4) on alternator (G2)

*BA15.40-N-1012-01B

7

Detach electric cable (2) at Alternator (G2)

*BA15.40-N-1010-01B

8

Detach electrical connector (3) and remove from generator (G2)

9

Detach alternator (G2) from bracket (6)

If necessary loosen bracket (6) on oil filter housing.

*BA15.40-N-1001-01B

*BA15.40-N-1003-01B

10

Detach alternator (G2) on carrier (7) and remove upward.

*BA15.40-N-1002-01B

11

Check belt pulley (11) of alternator (G2) for damage and smooth operation

Only when reinstalling the used alternator (G2).

In case of a complaint:

Replace belt pulley (11) on alternator (G2)

AR15.40-W-5710R

12

Install in the reverse order

Alternator

Number

Designation

Engine 924.9, 925.9, 926.9

BA15.40-N-1001-01B

Bolt, alternator bracket to oil filter

Nm

40

BA15.40-N-1002-01B

Nut, alternator to support

Nm

50

BA15.40-N-1003-01B

Bolt, alternator to bracket

Nm

65

BA15.40-N-1010-01B

Nut, electrical line to alternator terminal B+

Nm

8

BA15.40-N-1012-01B

Nut, electrical line to alternator terminal B

Nm

7

Henviste dokumenter