ar1540w5032j

Remove/install alternator

Type ar · emne 15.40 · version 0203 · 2011-06-17

Gælder for: ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976 ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5 ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976 ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976 ENGINES 925.9 in MODELS 970, 972, 974 ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 ENGINES 926.9 in MODEL 958.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 15 El-system motor › 15.40 Generator — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.30 Generator — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

Gælder også for motorer/gearkasser: 924 9**, 925 9**, 926 9**

AR15.40-W-5032J

Remove/install alternator

16.6.11

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2

ENGINES 926.9 in MODEL 958.0

Remove/install alternator

W15.40-1080-11

Shown on ENGINE 926.9 in MODEL 950

1 Charge air pipe (from turbocharger to charge air manifold)

2 Air intake hose

G2 Generator

Remove/install alternator

W15.40-1053-08

4 Wiring harness

5 Carrier

G2 Alternator

6 Oil filter housing

7 Poly-V belt

Remove/install

1

Switch off ignition

2

Disconnect ground lead from battery

AR54.10-W-0003A

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.

AS60.80-Z-0001-01A

3

Tilt cab

Installation: Only tilt cab back after leak test has been conducted.

Notes on tilting the cab

AH60.80-N-0003-01A

4

Remove charge air pipe (1) from turbocharger to charge air manifold

AR09.41-W-1311J

5

Remove air intake hose (2)

6

Loosen poly-V belt (7) and remove at alternator (G2)

Do not remove poly-V belt (7).

AR13.22-W-1202J

7

Remove electrical wiring harness (4) with ground line at alternator (G2)

*BA15.40-N-1009-01B

*BA15.40-N-1015-01B

8

Remove alternator (G2) from oil filter housing (6) bracket

*BA15.40-N-1003-01B

9

Detach alternator (G2) on carrier (5) and remove

*BA15.40-N-1002-01B

10

Inspect belt pulley of alternator (G2) for damage and concentric running

If the ALT (G2) was not replaced

If wear is found:

Replace alternator belt pulley (G2)

AR15.40-W-5710J

11

Install in the reverse order

Alternator

Number

Designation

Engines
904.9, 906.9
as of end no. 190708,
Engine
900.9, 902.9

Engine
924.9, 925.9, 926.9

BA15.40-N-1002-01B

Nut, alternator to support

Nm

50

50

BA15.40-N-1003-01B

Bolt, alternator to bracket

Nm

65

65

BA15.40-N-1009-01B

Bolt, ground line to alternator

Nm

12

12

BA15.40-N-1015-01B

Nut, electrical line to alternator terminal B2+

Nm

30

30

Henviste dokumenter