Serier
da
ar1540p5710mfc
Remove/install alternator belt pulley
Type ar · emne 15.40 · version 0102 · 2019-11-01
Gælder for: Engine 260 in model 118, 177, 247
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 15 El-system motor › 15.40 Generator — Serie 118 · Serie 177 · Serie 247
EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 118 · Serie 177 · Serie 247
EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.30 Generator — Serie 118 · Serie 177 · Serie 247
Gælder også for motorer/gearkasser: 260 ***
AR15.40-P-5710MFC
Remove/install alternator belt pulley
22.10.2019
Engine
260 in model 118, 177, 247
1
Belt pulley
2
Cap
G2
Alternator
Remove/install
1
Remove the alternator (G2).
AR15.40-P-5032MFC
2
Remove cover (2) of belt pulley (1).
3
Counterhold alternator shaft using suitable means and release belt pulley (1) using socket wrench and remove.
Installation: During repair work on alternator (G2), belt pulley (1) must basically always be replaced in the case of mileage greater than 100,000 km.
Poly-V belt pulley on alternator shaft
*BA15.40-P-1003-01W
Socket wrench
*602589001000
4
Install in the reverse order.
Number
Designation
Engine 260
BA15.40-P-1003-01W
Poly-V belt pulley on alternator shaft
Nm
75
Henviste dokumenter
