ar1530w7303a

Remove/install series relay

Type ar · emne 15.30 · version 0103 · 2012-02-16

Gælder for: ENGINE 904.9## ## as of 422015 in MODEL 958, 970, 972, 975, 976 mit Starter Teilenummer: A 006 151 22 01 ENGINE 924.9## ## as of 422015 in MODEL 958, 970, 972, 974, 975, 976 mit Starter Teilenummer: A 006 151 22 01 ENGINE 906.9## ## as of 422015 in MODEL 970, 972, 974, 975, 976 mit Starter Teilenummer: A 006 151 22 01

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 15 El-system motor › 15.30 Starter — Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 958 · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 15 Motor › 15.35 Starter › 15.35.11 Styreenhed/relæ — Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 958 · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.11 Styreenhed/modul/relæ — Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 958 · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

Gælder også for motorer/gearkasser: 924 9**

AR15.30-W-7303A

Remove/install series relay

15.2.12

ENGINE 904.9## ## as of 422015 in MODEL 958, 970, 972, 975, 976
mit Starter Teilenummer: A 006 151 22 01

ENGINE 924.9## ## as of 422015 in MODEL 958, 970, 972, 974, 975, 976
mit Starter Teilenummer: A 006 151 22 01

ENGINE 906.9## ## as of 422015 in MODEL 970, 972, 974, 975, 976
mit Starter Teilenummer: A 006 151 22 01

Remove/install series relay

W15.30-1046-11

1 Electrical lines circuit 30 (from starter)

2 Electrical line terminal 30 (from series relay)

3 Electrical line terminal 86 (from series relay)

4 Electrical line terminal 87 (from series relay)

5 Series relay

6 Bolts

7 Assembly pin

M1 Starter

Remove/install

1

Switch off ignition

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground lead from battery

Notes on battery

AH54.10-P-0001-01A

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with safety strut.

AS60.80-Z-0001-01A

3

Tilt cab

Notes on tilting the cab

AH60.80-N-0003-01A

4

Disconnect electrical lines of circuit 30 (1) at starter (M1)

*BA15.30-N-1002-01B

5

Remove electrical line terminal 30 (2), terminal 86 (3) and terminal 87 (4) on series relay (5)

Installation: Tighten nuts with about. 2.5 Nm.

6

Unscrew bolts (6) and remove series relay (5)

Tighten bolts (6) with about 6 Nm.

7

Install in the reverse order

8

Synchronize tachograph

9

Reset clock

10

Code radio

Starter

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

Engines
924.9, 925.9, 926.9

BA15.30-N-1002-01B

Nut, terminal 30 at starter

Nm

30

30

Henviste dokumenter