Remove/install starter

AR15.30-S-7100SE

Remove/install starter

15.2.12

14.9.09

Value modified: Nut for connection of circuit 30

*BA15.30-N-1002-01G

Value modified: Nut for connection of circuit 50

*BA15.30-N-1003-01G

 

Remove/install

 Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A



Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

1

Disconnect battery ground cable

AR54.10-S-0003S



Notes on battery

All models

AH54.10-P-0001-01A

2

Remove bottom engine compartment paneling

Only on models 639.701/703/705/711/713/

811/813/815 as of vehicle identification number 055347.

AR61.20-S-1105S

3

Disconnect electrical line circuit 30 (1) and electrical line circuit 50 (2)

 For this step, pull out protection against accidental contact.



*BA15.30-N-1002-01G



*BA15.30-N-1003-01G

4

Remove bolts (4)



*BA15.30-N-1001-01G

5

Remove starter motor (M1) from below

6

Install in the reverse order



Checking

7

Check toothed wheel for wear and check for damage

Number

Designation

Engine
642

BA15.30-N-1001-01G

Bolt connecting starter to crankcase

Nm

40

BA15.30-N-1002-01G

Nut for connection of circuit 30

Nm

16

BA15.30-N-1003-01G

Nut for connection of circuit 50

Nm

7