ar1530p7100fg

Remove/install starter

Type ar · emne 15.30 · version 0107 · 2006-01-31

Gælder for: ENGINE 122.9, 134.9, 135.9, 639.9 in MODEL 454.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 15 El-system motor › 15.30 Starter — Serie 454 (modeller 0**) · Serie 639 (modeller 9**)

EinPAS 15 Motor › 15.35 Starter › 15.35.20 Starter — Serie 454 (modeller 0**) · Serie 639 (modeller 9**)

Gælder også for motorer/gearkasser: 122 9**, 134 9**, 135 9**

AR15.30-P-7100FG

Remove/install starter

17.1.06

ENGINE 122.9, 134.9, 135.9, 639.9 in MODEL 454.0

Remove/install starter

P15.30-2169-05

1 Protective cap

2 Connector

3 Bolt

M1 Starter

 	Remove/install
1	Disconnect battery ground cable		AR54.10-P-0003FF
2	Detach lower engine compartment paneling		AR61.20-P-1105FF
3	Tilt protective cap (1) upwards and disconnect the electrical line underneath it at the starter (M1)		*BA15.30-P-1002-01I
4	Pull out the plug (2) on the starter (M1)
5	Unscrew bolts (3) and take starter (M1) down and out	 Replace bolts (3).
		 On engine 122.9, a ground cable is secured to the bottom bolt (3).
			*BA15.30-P-1001-01I
6	Install in the reverse order
7	Perform operational check of starter (M1)

 Starter

Number	Designation			Engine 122.9	Engine 134.9	Engine 135.9	Engine 639.9


BA15.30-P-1001-01I	Torx bolt connecting starter to transmission		Nm	20	20	20	20
BA15.30-P-1002-01I	Nut for circuit 30 connection to starter		Nm	14	11	11	11

Henviste dokumenter