Remove/install crankshaft position sensor

AR15.12-S-2134EG

Remove/install crankshaft position sensor

16.12.15

Model

447, 448 with engine 274

1

Bracket

4

Clamp

7

Screw/bolt

2

Screw/bolt

5

Clamp

B70/2

Crankshaft Hall sensor

3

Heat shield

6

Electrical connection

 Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger !

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 

Remove/install

1

Remove catalytic converter

AR49.10-S-5500EG

2

Remove bracket (1)

 To do this, remove screw/bolts (2).

 M8

*BA00.10-N-1003-01A

3

Remove heat shield (3)

 To do this pull heat shield (3) out of the clamps (4).

4

Remove clamp (5)

5

Disconnect electrical connection (6)

6

Remove crankshaft Hall sensor (B70/2)

 Remove screw/bolt (7) to do this.

 Bolt, crankshaft position sensor to crankcase

*BA15.10-N-1001-03F

7

Install in the reverse order

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

8.8

10.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

23

32

Phosphated

Nm

21

29

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

12.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

38

Phosphated

Nm

36

 Position sensors

Number

Designation

Engine 274 in model 447, 448

BA15.10-N-1001-03F

Bolt, crankshaft position sensor to crankcase

Nm

9