Read out and send control unit log of exhaust aftertreatment control unit (ACM)
6.7.15
Engine
470.9, 471.9, 473.9, 934.9, 936.9
As of Xentry DVD 07/2015:
Read out control unit log
1
Connect diagnostic system, start XENTRY and switch on ignition
2
Connect USB stick to a USB connector on XENTRY Connect
The USB stick must from XENTRY DVD 07/2015 always be attached to the XENTRY Tab.
3
Read out the control unit log in XD
To do so, next select the following menu items: ACM - Exhaust aftertreatment (A60) Adaptations Transfer of parameter data Read off parameter data from control unit After successful read out: The input field is filled automatically, but can be altered manually. If a manual change is made, the hook must bet set again afterwards. Always select the inserted USB stick as the storage location
Send control unit log.
4
Connect the USB stick to a computer with a TIPS access and attach the file from XENTRY with the ending ".cod" to the respective TIPS case