Remove/install temperature sensor downstream SCR catalytic converter · ar1440w2012c · Mercedes-Benz WIS

AR14.40-W-2012C

Remove/install temperature sensor downstream SCR catalytic converter

22.3.11

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS4) BlueTec 4

ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 958.0 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 958.0 with CODE (MS5) BlueTec 5

W14.40-1015-06

Shown on model 950.5

1 Muffler (with reduction catalytic converter)

2 Electrical connector

3 Bracket

4 Plug housing

B116 Temperature sensor downstream of SCR catalytic converter

 	Remove/install
1	Switch off ignition
2	Disconnect electrical connector (2)	 Installation: Replace removed cable tie.
3	Detach connector housing (4) at bracket (3)
4	Remove temperature sensor downstream of SCR catalytic converter (B116) at muffler (1)		*BA14.40-N-1014-02C
5	Install in the reverse order

 Exhaust aftertreatment, Blue Tec

Number	Designation		Engine 900.9, 902.9, 924.9, 925.9, 926.9 with code MS4 or code MS5


BA14.40-N-1014-02C	Temperature sensor downstream of SCR catalytic converter on muffler	Nm	45