AR14.40-W-2010R | Remove/install SCR tank heater solenoid valve | 22.3.11 |
ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5
W14.40-1463-08
1 Compressor air intake duct
2 Metering device
3 Electrical connector
7 Coolant hose
Y107 SCR tank heater solenoid valve
4 Coolant hose
5 Clamping device
6 Bracket
| Remove/install | ||
1 | Remove metering device (2) from exhaust aftertreatment system | ||
2 | Remove clamp for compressor air intake duct (1) on mount and fasten compressor air intake duct (1) to top of engine. | ||
3 | Disconnect electrical connector (3) from SCR tank heater solenoid valve (Y107) | ||
4 | Clamp off coolant hose (4) with clamp (5) | | |
5 | Detach coolant hose (4) from SCR tank heater solenoid valve (Y107) | Installation: Before removing coolant hose (4) press retainer into plug coupling.. | |
6 | Detach SCR tank heater solenoid valve (Y107) from bracket (6( | Installation: Before removing SCR tank heater solenoid valve (Y107) insert bolts into holes. | |
| |||
7 | Clamp off coolant hose (7) with clamping device (5) | | |
8 | Detach coolant hose (7) from SCR tank heater solenoid valve (Y107) | Installation: Before removing coolant hose (7) press retainer into plug coupling.. | |
9 | Remove the SCR tank heater solenoid valve (Y107) | ||
10 | Install in the reverse order |
Exhaust aftertreatment
Number | Designation | Engine | |||
BA14.40-N-1012-02C | SCR tank heater solenoid valve on bracket | Nm | 25 | ||
Clamping device
000 589 40 37 00