ar1440w201001a

Disconnect/connect hose and line connections on exhaust aftertreatment system

Type ar · emne 14.40 · version 0103 · 2010-06-24

Gælder for: ENGINE 902.9 in MODEL 957 with CODE (MS4) BlueTec 4 ENGINE 902.9 in MODEL 957 with CODE (MS5) BlueTec 5 ENGINE 926.9 in MODEL 957 with CODE (MS4) BlueTec 4 ENGINE 926.9 in MODEL 957 with CODE (MS5) BlueTec 5

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 902 (modeller 9**) · Serie 957

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.13 ledning/slange/ventil — Serie 902 (modeller 9**) · Serie 957

Gælder også for motorer/gearkasser: 926 9**

AR14.40-W-2010-01A

Disconnect/connect hose and line connections on exhaust aftertreatment system

Danger!

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning from swallowing AdBlue

Only pour AdBlue into suitable containers. Only begin work on the exhaust aftertreatment system after releasing the pressure.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue

AH14.40-N-0001-01A

Compressed air lines

Number

Designation

Model
930, 932, 933, 934, 950, 952, 953, 954, 957, 958

BA00.18-N-1003-01A

Compressed air connection system
SCHÄFER "SDF" in metallic material

M101

Nm

5

Disconnect/connect hose and line connections on exhaust aftertreatment system

W14.40-1394-12

Disconnect, connect


1 Expose compressed air line (1) on wiring harness and disconnect at AdBlue metering device (2).

Seal hole with suitable plugs.

2 Disconnect AdBlue (5) line on AdBlue metering device (2).

Catch escaping AdBlue and dispose of it. Do not reuse caught AdBlue since contaminated AdBlue can lead to damage in exhaust aftertreatment system.

Seal connection fitting with suitable stop plugs.

3 Disconnect coolant line (3) on connecting point (4) and bind to engine.

Collect coolant that flows out

Disconnect/connect hose and line connections on exhaust aftertreatment system

W14.40-1395-02

4 Disconnect coolant line (6) at feed line SCR tank heater solenoid valve (Y107)

Collect coolant that flows out

5 Connect in reverse order.

Henviste dokumenter