ar1440w2009r

Remove/install pressure filter at pump module of exhaust aftertreatment system

Type ar · emne 14.40 · version 0103 · 2011-04-04

Gælder for: ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 949

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.51 pumpe/doseringsenhed/dyse — Serie 949

Gælder også for motorer/gearkasser: 926 9**

AR14.40-W-2009R

Remove/install pressure filter at pump module of exhaust aftertreatment system

22.3.11

ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5

Remove/install pressure filter at pump module of exhaust aftertreatment system

W14.40-1470-08

1 Pump module

2 Insulating hose

3 Line fitting (AdBlue feed line)

7 Pressure filter housing

8 Filter element

9 Filter cup

4 AdBlue feed line

5 AdBlue return line

6 Line fitting (AdBlue return line)

Remove/install

Danger!

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

1

Open insulating tubing (2) in area of line fittings (3, 6) to a length of approx. 10 cm and push back

Installation: Replace removed cable tie and insulation tape.

*950589013700

2

Clamp off AdBlue feed and return lines (4, 5)

*000589543700

3

Remove filter cup (9) with filter insert (8) on pressure filter housing (7)

Installation: Clean pressure filter housing (7) and replace filter cup (9) with filter insert (8).

Thinly coat O-rings on filter elements (8) and filter cup (9) with grease before installing.

*BR00.45-Z-1019-06A

Always use the prescribed grease as lubricant. Also ensure that antifriction agent is used very sparingly otherwise this can lead to damage to the exhaust aftertreatment system.

*BA14.40-N-1001-02C

4

Install in the reverse order

5

Check filter cup (9) for leaks

Visual inspection.

Exhaust aftertreatment

Number

Designation

Engine
900.9, 902.9, 924.9, 925.9, 926.9 with code MS4 or code MS5

BA14.40-N-1001-02C

Filter cup on pump module

Nm

32

Remove/install pressure filter at pump module of exhaust aftertreatment system
Remove/install pressure filter at pump module of exhaust aftertreatment system

950 589 01 37 00

Roller tongs

Clamping device

000 589 54 37 00

Repair materials

Number

Designation

Order number

BR00.45-Z-1019-06A

ABS sensor grease

A 000 989 62 51 10

Henviste dokumenter