ar1440w2003r

Remove/install SCR AdBlue pressure sensor

Type ar · emne 14.40 · version 0103 · 2011-04-04

Gælder for: ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 949

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.12 Sensor/kontakt/ledningssæt — Serie 949

Gælder også for motorer/gearkasser: 926 9**

AR14.40-W-2003R

Remove/install SCR AdBlue pressure sensor

22.3.11

ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5

Remove/install SCR AdBlue pressure sensor

W14.40-1507-06

1 Metering device

2 O-ring

3 Electrical connector

B129 SCR AdBlue pressure sensor

Remove/install

Danger!

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

1

Switch off ignition

2

Open engine hood and move to vertical position

AR88.40-W-1000R

3

Remove air intake duct for fresh air intake on cab

AR83.10-W-3220R

4

Disconnect electrical connector (3) at SCR AdBlue pressure sensor (B129)

5

Remove SCR AdBlue pressure sensor (B129) at metering device (1)

*BA14.40-N-1006-02C

6

Install in the reverse order

Exhaust aftertreatment, Blue Tec

Number

Designation

Engine
900.9, 902.9, 924.9, 925.9, 926.9 with code MS4 or code MS5

BA14.40-N-1006-02C

SCR AdBlue pressure sensor to metering device

Nm

30

Henviste dokumenter