Empty, fill AdBlue tank

AR14.40-D-2014-02S

Empty, fill AdBlue tank

Engine

642 in model 906.6/7

with code MH1 (Low-emission engine EPA 10/CARB)

except code KP2 (AdBlue tank, 12 l, in the engine compartment)

Engine

642 in model 906.6/7

with code MH3 (Low-emission engine EPA 13/CARB)

except code KP2 (AdBlue tank, 12 l, in the engine compartment)

Modification notes

30.7.15

Clip drain hose (4) onto AdBlue® tank (3), added

Operation step 6

14.8.15

AdBlue® container and filler line

BF14.40-N-1001-01A

 Filling capacity for BlueTEC (SCR) diesel exhaust treatment

Number

Designation

Engine 642 in model 906.6/7
with code MH1 (Low-emission engine EPA 10/CARB)
except code KP2 (AdBlue tank, 12 l, in the engine compartment)
Engine 642 in model 906.6/7
with code MH3 (Low-emission engine EPA 13/CARB)
except code KP2 (AdBlue tank, 12 l, in the engine compartment)

Engine 642 in model 906
with code MA6 (Low-emission vehicle Euro 6 Gr. III)
Engine 642 in model 906
with code MB6 (Low-emission vehicle, Euro 6 Gr. 1)
Engine 642 in model 906
with code MH5 (Low-emission engine EPA 14/CARB)
Engine 642 in model 906
with code MH7 (Engine, low-emission EPA 16/CARB)
Engine 642 in model 906
with code MP6 (Engine version, Euro VI)
Engine 651 in model 906

BF14.40-N-1001-01A

AdBlue® container and filler line

Filling capacity - initial filling

Liter

 19

 18

Sheet

BB00.40-P-0352-01A

BB00.40-P-0352-01A

1

Unscrew screw cap (2) on AdBlue® filler neck (1).

2

Unclip drain hose (4) from AdBlue® tank (3).

3

Place clean container (6) under drain hose (4).

 Secure container (6) against falling.

4

Detach plug (5) and allow AdBlue® to drain off completely into the container (6).

 Press-in both notches (arrows) and release plug (5).

5

Clean drain hose (4) on connection immediately and then seal with plug (5).

6

Clip in drain hose (4) from AdBlue® tank (3).

7

Place a film and absorbent paper on working area around AdBlue® filler neck (1).

8

Pour in new AdBlue® up to the fill level markings (arrow) in the AdBlue® filler neck (1)  .

9

Remove sheet and paper.

 Do not allow any paper to find its way into the AdBlue® filler neck (1) and AdBlue® tank.
There is a risk of damage to the AdBlue® system otherwise.

10

Remove the AdBlue® residues.

11

Tighten cap (2) on AdBlue® filler neck (1).