W14.40-1519-09
1 | Metering unit | 3 | Strainer | 5 | Compressed air inlet | ||
2 | Compressed air piping | 4 | Screwdriver |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Topical note | Notes on tilting the cab | ||
Remove/install | |||
1 | Tilt the cab | ||
2 | Remove the compressed air pipe line (2) from the metering device (1) | Wait until the pressure is released before starting any work on the exhaust gases treatment system. | |
Installation: Before mounting, inspect the compressed air tubing connection (2) for impurities, contaminants and damage. | |||
.Compressed air line hollow bolt on dosage unit | |||
3 | Remove the strainer (3) using a screwdriver (4) | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
4 | Installation in reverse order | ||
5 | Start the engine | ||
6 | Check the tightness of the dosing unit (1) with the engine running |
Henviste dokumenter
- ah6080n000301a Oplysninger om tipning af førerhus
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes