Retrofit test connection on compressed air inlet of metering device

Type ar · emne 14.40 · version 0100 · 2016-02-12

Gælder for: Cumbustion engine 457 with Vehicle 958.434, 958.443, 958.441, 958.444, 958.453, 958.452, 958.454Cumbustion engine 457.910 with Vehicle 958.431, 958.433, 958.451, 958.471, 958.472, 958.478Cumbustion engine 457.911 with Vehicle 695.053, 695.023Cumbustion engine 460.984 with Vehicle 934.### #R, 934.### #S

Ikke tilgængelig på “da”; vises på Engelsk.

AR14.40-B-2042TB

12.02.16

Cumbustion engine 457 with Vehicle 958.434, 958.443, 958.441, 958.444, 958.453, 958.452, 958.454

Cumbustion engine 457.910 with Vehicle 958.431, 958.433, 958.451, 958.471, 958.472, 958.478

Cumbustion engine 457.911 with Vehicle 695.053, 695.023

Cumbustion engine 460.984 with Vehicle 934.### #R, 934.### #S

Retrofit test connection on compressed air inlet of metering device

W14.40-1386-06

1 Test connection (M12 1.5)

2 Mouth (M121.5/M101)

3 Compressed air inlet

4 Metering unit

5 Compressed air line

	REMOVAL
1	Remove the hollow bolt at the compressed air inlet (3) of the metering unit (4)
	Installing
2	Install the compressed air pipe (5) with the pipe opening (2) at the compressed air inlet (3)	Install new sealing rings.
			*BA14.40-B-1037-02C
3	Install the testing connection (1) at mouth (2)		*BA14.40-B-1038-02C

Exhaust aftertreatment

Número	Denominação		Engine 457.9 with Code MS5


BA14.40-B-1037-02C	Connection on dosage unit	Nm	15
BA14.40-B-1038-02C	Testing connection on the connection	Nm	10