ar1440b2038a
Remove/install NOx sensor with controller unit
Type ar · emne 14.40 · version 0301 · 2019-11-22
Gælder for: Engine 924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2 Engine 926.9 in model 368, 382.17/18, 384.0
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 368 · Serie 382 (modeller 17*, 18*) · Serie 384 (modeller 0**, 2**) · Serie 685 (modeller 282, 284, 289, 290) · Serie 979 (modeller 2**)
EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.11 Styreenhed/relæ — Serie 368 · Serie 382 (modeller 17*, 18*) · Serie 384 (modeller 0**, 2**) · Serie 685 (modeller 282, 284, 289, 290) · Serie 979 (modeller 2**)
EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.12 Sensor/kontakt/ledningssæt — Serie 368 · Serie 382 (modeller 17*, 18*) · Serie 384 (modeller 0**, 2**) · Serie 685 (modeller 282, 284, 289, 290) · Serie 979 (modeller 2**)
Gælder også for motorer/gearkasser: 924 9**, 926 9**
AR14.40-B-2038A
| Remove/install NOx sensor with controller unit
| 07.11.2019
|
Engine
| 924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2
|
Engine
| 926.9 in model 368, 382.17/18, 384.0
|
1
| Electric connection
|
| 4
| Support
|
| 7
| NOx sensor with control unit (17B08)
|
2
| Electric wire
|
| 5
| Bolt
|
| 8
| NOx sensor control unit
|
3
| Reduction catalyst
|
| 6
| Power cable (NOx control unit to the electric connection plug)
|
| 9
| NOx sensor
|
| Remove/install
|
|
|
1
| Turn off ignition
|
|
|
Topical note
| Notes on self-locking nuts and bolts
|
| AH00.00-N-0001-01A
|
2
| Remove the NOx (8) control unit on the holder (4)
| ]The NOx sensor control unit (8) must always be removed first, otherwise removing the NOx sensor (9) may damage the power cable (2) by twisting it.
|
|
|
|
| The NOx sensor control unit (8) and the NOx sensor (9) form a set and must be removed together.
|
|
|
|
| .NOx sensor control unit on support
| *BA14.40-B-1043-02B
|
3
| Disconnect the power cable (6) from the electrical connection (1), and loosen the electrical cable (2) from its brackets
|
|
|
4
| Remove the NOx sensor (9)
| Installation: Apply paste to the NOx sensor (9) thread.
|
|
|
|
| Paste, hot lubrication 1 kg, DBL 6879.20
| *BR00.45-Z-1005-06A
|
|
|
| .NOx sensor on silencer
| *BA14.40-B-1042-02B
|
5
| Install in reverse order
|
|
|
Exhaust gas after-treatment
|
Number
| Designation
|
| Engine 924.9, 926.9 except Liquid Only
|
BA14.40-B-1042-02B
| NOx sensor on silencer
| Nm
| 50
|
Exhaust gas after-treatment
|
Number
| Designation
|
| Engine 924.9, 926.9 except Liquid Only
|
BA14.40-B-1043-02B
| NOx sensor control unit on support
| Nm
| 12
|
Number
| Designation
| Order number
|
BR00.45-Z-1005-06A
| Paste, hot lubrication 1 kg, DBL 6879.20
| A 000 989 76 51
|
Henviste dokumenter
