ar1440b2033ta

Check wiring harness of pump module

Type ar · emne 14.40 · version 0202 · 2019-10-26

Gælder for: Engine 457 in model 693, 695 with code MS5 (Euro V) Engine 457 in model 695 with code MS5 (BlueTec 5) Engine 457 in model 958 with code MS5 (BlueTec 5) Engine 460.984 in model 934 with code MS5 (BlueTec 5) Engine 924 in model 693, 694, 695 with code MS5 (Euro V) Engine 924 in model 958 with code MS5 (BlueTec 5) Engine 924 in model 979 with code MS5 (Euro V) Engine 926 in model 693, 695 with code MS5 (Euro V) Engine 926 in model 958 with code MS5 (BlueTec 5)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 460 (modeller 984) · Serie 693 · Serie 694 · Serie 695 · Serie 934 · Serie 958 · Serie 979

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.12 Sensor/kontakt/ledningssæt — Serie 460 (modeller 984) · Serie 693 · Serie 694 · Serie 695 · Serie 934 · Serie 958 · Serie 979

Gælder også for motorer/gearkasser: 457 ***, 924 ***, 926 ***

AR14.40-B-2033TA

Check wiring harness of pump module

18.10.2019

Engine

457 in model 693, 695

with code MS5 (Euro V)

Engine

457 in model 695

with code MS5 (BlueTec 5)

Engine

457 in model 958

with code MS5 (BlueTec 5)

Engine

460.984 in model 934

with code MS5 (BlueTec 5)

Engine

924 in model 693, 694, 695

with code MS5 (Euro V)

Engine

924 in model 958

with code MS5 (BlueTec 5)

Engine

924 in model 979

with code MS5 (Euro V)

Engine

926 in model 693, 695

with code MS5 (Euro V)

Engine

926 in model 958

with code MS5 (BlueTec 5)

Check wiring harness of pump module

Electrical connection of the pump module with corrosion signs

1

Pump module

2

Connector

3

Connector

4

Contact pin

5

Contact socket

W14.40-1292-11

Check wiring harness of pump module

Electrical connection of the SCR module with corrosion signs

6

Contact pin

A95

SCR module

W14.40-1293-11

Check wiring harness of pump module

Outlet of the SCR module with corrosion signs

7

Connection bushing

X1

Outlet

W14.40-1300-11

Inspect

1

Turn off ignition

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut.

AS60.80-Z-0001-01A

2

Tilt the cab

Only for vehicles equipped with tilting cabin need.

Topical note

Notes on tilting the cab

.

AH60.80-N-0003-01A

3

Separate the electrical connector of the pump module (1) and check for corrosion signs

If the electrical connector is in good conditions:

it will not be necessary to carry out visual inspections.

If the electrical connector is corroded:

Proceed with step 4.

4

Separate the electrical connector of the SCR module (A95) and check for corrosion signs

If the electrical connector is in good conditions:

Proceed with the work step #6.

If the electrical connector is corroded

Proceed with step 5.

5

Replace the outlet (X1) and the SCR module (A95)


.

AR14.40-B-2020TC

6

Replace the electrical harness from the pump module (1) up to the SCR module (A95)


.

AR14.40-B-2034TA

Henviste dokumenter