Remove/install magnetic adapter at filler neck of AdBlue tank

AR14.40-B-2024A

Remove/install magnetic adapter at filler neck of AdBlue tank

23.07.2019

Engine

924.9 in model 368, 384.0/2, 685.282/284/289/290

with code MS5 (Euro V)

Engine

926.9 in model 368, 382.17/18, 384.0

with code MS5 (Euro V)

1

Orifice

5

Mounting guide

2

Fixing hook

6

AdBlue reservoir

3

Reservoir end cover

7

Magnetic adapter (Elafix 40)

4

Screwdriver



Remove

 Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Remove AdBlue tank (6) cap (3)

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A



Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

2

Introduce mounting guide (5) into the hole (1)



Assembly aid for removal/installation of magnetic adapter at AdBlue(R) tank filler neck

WF58.50-B-1440-01A

3

Using two screwdrivers (4) press the fixing hooks (2) in the direction of the arrow, inwards and then slide the mounting guide (5) to the stop

4

Remove the magnetic adapter (7)



Install

5

Manually compress the fixing hook (2) and insert the mounting guide (5) into the hole (1) to the stop



Assembly aid for removal/installation of magnetic adapter at AdBlue(R) tank filler neck

WF58.50-B-1440-01A

6

Introduce the magnetic adapter (7) to the stop into the AdBlue tank (6) filler neck

7

Hold the magnetic adapter (7) and remove the mounting guide (5)

 When removing the mounting guide (5) the fixing hooks (2) engage with a click.