ar1330g1001a

Check delivery rate of compressor

Type ar · emne 13.30 · version 0203 · 2019-07-16

Gælder for: Engine 353, 366 in model 435 Engine 356.9, 357.9 in model 427.1, 437.1 Air-/water-cooled compressor (18.3 bar supply pressure) Engine 364 in model 418 Water-cooled compressor (18.3 bar supply pressure) Engine 602 in model 408 Air-cooled compressor (18.3 bar supply pressure)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.30 Kompressor (trykluftsystem) — Serie 357 (modeller 9**) · Serie 364 · Serie 408 · Serie 418 · Serie 427 (modeller 1**) · Serie 435 · Serie 437 (modeller 1**) · Serie 602

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.35 trykluftsystem › 21.35.35 Kompressor — Serie 357 (modeller 9**) · Serie 364 · Serie 408 · Serie 418 · Serie 427 (modeller 1**) · Serie 435 · Serie 437 (modeller 1**) · Serie 602

Gælder også for motorer/gearkasser: 353 ***, 356 9**, 366 ***

AR13.30-G-1001A

Check delivery rate of compressor

28.06.2019

Engine

353, 366 in model 435

Engine

356.9, 357.9 in model 427.1, 437.1

Air-/water-cooled compressor (18.3 bar supply pressure)

Engine

364 in model 418

Water-cooled compressor (18.3 bar supply pressure)

Engine

602 in model 408

Air-cooled compressor (18.3 bar supply pressure)

Test sequence

1

Decouple the pneumatically activated detachable parts / body implements


Before a complaint is made regarding the delivery rate, check the delivery rate by calculating the filling times.
Before the compressor is replaced!


Information about the calculated delivery rate is to be given in the warranty return slip.
In the event of non-compliance, warranty/goodwill claims in the future will be rejected.


The compressors sent in with the warranty/goodwill claim must not have been opened (removal of the cylinder head).
In the event of non-compliance, warranty/goodwill claims in the future will be rejected.

e.g. trailer with pneumatic brakes

2

Bring the spring-loaded brake cylinder into the brake position

3

Put gearshift lever in neutral

4

Check the air filter for contamination

5

Bring the engine to operating temperature

6

Measure filling time

Topical note

Information on faults in the case of poor delivery of compressor

Typ 418, 427, 437

AH13.30-N-1000-02B

Model 427.1, 437.1

AP13.20-G-1350A

If the filling times are exceeded, check the causes of the error.

Until the shutoff pressure is reached pressure regulator / air drier

Model 418, 427.1, 437.1Air-cooled compressor

*BE13.30-N-1001-01D

Model 418, 427.1, 437.1Water-cooled compressor

*BE13.30-N-1002-01D

Model 418, 427.1, 437.1Air-cooled compressor

*BE13.30-N-1001-01D

Model 418, 427.1, 437.1Water-cooled compressor

*BE13.30-N-1002-01D

Test and adjustment values of compressor

Number

Designation

ENGINE 353.961, 357.9, 366.955

ENGINE 364.982/985

BE13.30-N-1001-01D

Air-cooled compressor

Filling time

s

240

–

at

1/min

1800

–

System volume

Liter

20

20

Cutoff pressure

bar

18,3 (0,5)

18,3 (0,5)

Test and adjustment values of compressor

Number

Designation

ENGINE 353.961, 357.9, 366.955

ENGINE 356.955/ 956/980/997

BE13.30-N-1002-01D

Water-cooled compressor

Filling time

s

190

190

at

1/min

1800

1800

System volume

Liter

20

20

Cutoff pressure

bar

18,3 (0,5)

18,3 (0,5)

Test and adjustment values of compressor

Number

Designation

ENGINE 364.982/985

BE13.30-N-1002-01D

Water-cooled compressor

Filling time

s

190

at

1/min

1800

System volume

Liter

20

Cutoff pressure

bar

18,3 (0,5)

Henviste dokumenter