ar1325g3200dd

Remove/install poly-V belt tensioning device

Type ar · emne 13.25 · version 0200 · 2019-10-07

Gælder for: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.90/93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.25 Remspændeanordning — Serie 000 (modeller 001) · Serie 900 (modeller 91*, 92*) · Serie 902 (modeller 91*, 93*) · Serie 904 (modeller 94*, 95*, 96*, 97*) · Serie 906 (modeller 90*, 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 000 (modeller 001) · Serie 900 (modeller 91*, 92*) · Serie 902 (modeller 91*, 93*) · Serie 904 (modeller 94*, 95*, 96*, 97*) · Serie 906 (modeller 90*, 93*, 94*, 95*, 96*, 98*, 99*)

Gælder også for motorer/gearkasser: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*

AR13.25-G-3200DD

Remove/install poly-V belt tensioning device

15.08.2019

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.90/93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

Modification notes

26.03.2019

Document completely revised

Remove/install poly-V belt tensioning device

Shown on engine 926.9 with alternator

1

Poly-V-belt

2

Crankcase

3

Tensioning device

W13.25-1008-06

Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Danger

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A

Notes on work safety regulations for vehicles with natural gas-powered engines

AH00.10-N-1000-04A

Remove/install

1

Release tension of poly-V-belt (1) and remove from tensioning device (3).

AR13.22-G-1202DD

Do not remove poly-V-belt (1).

2

Remove tensioning device (3) at crankcase (2).


Tensioning device of company Dayco

AR13.25-G-3200-02DD

Tensioning device of company Gates

AR13.25-G-3200-02DE

Bolt, tensioning device to crankcase

*BA13.25-N-1001-01K

Bolt, tensioning device to hydraulic pump holder

*BA13.25-N-1002-01K

3

Install in the reverse order

Belt tensioning device

Number

Designation

Engine 900.9, 902.9, 904.9, 906.9 in model 000.001

Engine 924.9, 925.9, 926.9 in model 000.001

BA13.25-N-1001-01K

Bolt, tensioning device to crankcase

Nm

50

50

Belt tensioning device

Number

Designation

Engine 900.9, 902.9, 904.9, 906.9 in model 000.001

Engine 924.9, 925.9, 926.9 in model 000.001

BA13.25-N-1002-01K

Bolt, tensioning device to hydraulic pump holder

Nm

50

50

Henviste dokumenter