Remove/install poly-V belt tensioning device

AR13.25-G-3200B

21.11.11

ENGINES 900.915 /916, 902.923 /924 /935, 904.927 /928, 906.935 /955

G13.22-3104-11

1 Poly-V belt

2 Poly-V belt

3 Tensioning device

4 Bracket

5 Tensioning device

6 Oil filter housing

Modification notes

17.11.11

Deviating attachment regulation for clamping device from the company Gates with part number
"A 906 200 37 70".

Operation step 4

	Removing
1	Remove poly V-belts (1, 2)		AR13.22-G-1202B
2	Detach tensioning device (3) at bracket (4) of hydraulic pump
3	Detach tensioning device (5) at oil filter housing (6)
	Install
4	Attach tensioning device (3, 5)	 Note different installation instructions. The clamping device (3, 5) for the company Gates with part number "A 906 200 37 70" must be attached using a special procedure. Observe part number on the rear side of the removed clamping device (3, 5).
		Clamping device from the company Gates except part number "A 906 200 37 70" and clamping device from the company Dayco	AR13.25-G-3200-02BB
		Clamping device from the company Gates with part number "A 906 200 37 70"	AR13.25-G-3200-02BC
			*BA13.25-N-1001-01L
			*BA13.25-N-1002-01L
5	Install poly-V belts (1, 2)		AR13.22-G-1202B

 Belt tensioning device

Number	Designation		Engine 900.91/92, 902.92/93, 904.92/95, 906.935/95, 924.91/92/93, 926.96


BA13.25-N-1001-01L	Bolt, poly-V belt tensioning device to crankcase	Nm	50
BA13.25-N-1002-01L	Bolt, poly-V belt tensioning device to bracket of hydraulic pump	Nm	50