Remove/install poly V-belt tensioning device

Type ar · emne 13.25 · version 0102 · 2001-11-08

Gælder for: ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Ikke tilgængelig på “da”; vises på Engelsk.

AR13.25-D-3200D

6.4.99

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

D13.25-1101-06

Shown on engine 611

1 Poly V-belt tensioning device

2 Pin

3 Cap

4 Tensioning pulley

5 Screw

6 Screw

 	Remove/install
1	Remove poly V-belt		AR13.22-D-1202E
2	Remove pin (2) for locking tensioning pulley and relieve pressure on tensioning device (1)		AR13.22-D-3902-04A
3	Remove tensioning device (1)	  If tensioning pulley (4) is replaced. 	*BA13.25-P-1001-01G
		Press off end cover (3) and fit on existing tensioning pulley (4).
			*BA13.25-P-1002-01G
4	Install in the reverse order

 Belt tensioning device

Number	Designation		Engine 611.981/ 983/987	Engine 612.981


BA13.25-P-1001-01G	Bolt of poly V-belt tensioning device to timing case cover	Nm	30	30
BA13.25-P-1002-01G	Bolt of tensioning pulley to poly V-belt tensioning device	Nm	36	36