ar1325d3200ad

Remove/install poly-V belt tensioning device

Type ar · emne 13.25 · version 0101 · 2008-07-15

Gælder for: ENGINES 900.917 /918 /919 in MODEL 668, 670

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.25 Remspændeanordning — Serie 668 · Serie 670 · Serie 900 (modeller 917, 918, 919)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 668 · Serie 670 · Serie 900 (modeller 917, 918, 919)

AR13.25-D-3200AD

Remove/install poly-V belt tensioning device

9.7.08

ENGINES 900.917 /918 /919 in MODEL 668, 670

Remove/install poly-V belt tensioning device

D13.25-1102-06

1 Poly-V belt tensioning device

2 Tensioner pulley

Remove/install

Danger!

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; shield off hazard area if necessary.
Inspect special tools for damage and proper operation (visual inspection).
Wear protective gloves.

AS00.00-Z-0001-01A

1

Slacken poly-V belt and take it off tensioner pulley (2)

AR13.22-D-3902-05AD

2

Remove poly-V belt tensioning device (1) with tensioner pulley (2)

Check poly-V belt tensioning device (1) and tensioner pulley (2); replace if necessary.

Installation: Observe guide pin for poly-V belt tensioning device (1).

*BA13.25-N-1001-01C

3

Install in the reverse order

Belt tensioning device

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA13.25-N-1001-01C

Bolt of poly V-belt tensioning device to oil filter housing

Nm

50

Henviste dokumenter