ar1325b3200a

Remove/install poly-V belt tensioning device

Type ar · emne 13.25 · version 0301 · 2020-03-07

Gælder for: Engine 904.9, 906.9 (except 906.999), 924.9 (except 924.92), 926.9 (except 926.942/95) in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.25 Remspændeanordning — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 1**) · Serie 384 (modeller 06*, 07*) · Serie 634 (modeller 0**) · Serie 685 (modeller 282, 284, 289, 290) · Serie 904 (modeller 9**) · Serie 906 (modeller 900, 901, 902, 903, 910, 911, 912, 913, 915, 916, 917, 918, 919, 920, 921, 922, 923, 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, 940, 941, 944, 945, 946, 947, 948, 949, 950, 951, 952, 953, 954, 955, 956, 960, 961, 963, 964, 965, 966, 967, 970, 972, 973, 974, 975, 977, 982, 983, 984, 985, 987, 988, 989, 990, 991, 992, 993, 994, 995, 998) · Serie 979 (modeller 2**)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 1**) · Serie 384 (modeller 06*, 07*) · Serie 634 (modeller 0**) · Serie 685 (modeller 282, 284, 289, 290) · Serie 904 (modeller 9**) · Serie 906 (modeller 900, 901, 902, 903, 910, 911, 912, 913, 915, 916, 917, 918, 919, 920, 921, 922, 923, 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, 940, 941, 944, 945, 946, 947, 948, 949, 950, 951, 952, 953, 954, 955, 956, 960, 961, 963, 964, 965, 966, 967, 970, 972, 973, 974, 975, 977, 982, 983, 984, 985, 987, 988, 989, 990, 991, 992, 993, 994, 995, 998) · Serie 979 (modeller 2**)

Gælder også for motorer/gearkasser: 924 91*, 924 93*, 924 94*, 924 97*, 924 98*, 924 99*, 926 900, 926 910, 926 911, 926 912, 926 913, 926 914, 926 915, 926 916, 926 917, 926 918, 926 919, 926 920, 926 921, 926 924, 926 925, 926 926, 926 927, 926 928, 926 929, 926 930, 926 932, 926 933, 926 934, 926 935, 926 937, 926 938, 926 941, 926 945, 926 946, 926 947, 926 948, 926 949, 926 960, 926 961, 926 969, 926 970, 926 971, 926 972, 926 973, 926 974, 926 975, 926 976, 926 985, 926 986, 926 987, 926 988, 926 989, 926 990, 926 991, 926 992, 926 993, 926 994, 926 995, 926 996, 926 997, 926 998, 926 999

AR13.25-B-3200A

Remove/install poly-V belt tensioning device

18.02.2020

Engine

904.9, 906.9 (except 906.999), 924.9 (except 924.92), 926.9 (except 926.942/95) in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2

Remove/install poly-V belt tensioning device

1A	Hex head bolt (previous version)
1B	Internal hex head bolt (current version)
2A	Tensioner device with pulley
	(previous version)
2B	Tensioner device with pulley
	(current version)
3	Oil filter
4	Drive belt

B13.25-0001-06

 	Remove/install
1	Remove the Polly-V belt (4)	.	AR13.22-B-1202G
		Engine 904.920 for vehicles 384.067	AR13.22-B-1202A
		Engine 924.912/913, 926.932 on Type 368.0/1, 384.06/07	AR13.22-B-1202C
		Engine 904 on Type 368.0/1	AR13.22-B-1202H
2	Remove the bolt (1A/1B) and remove the tensioner device (2A/2B) of the poly-V belt	 Attach the tensioning device with the corresponding bolt (see the figure).
		 Installation: Fasten the tensioner device (2A/2B) to lubricant oil filter housing (3), paying attention to the correct positioning of the guide pins.
		 Tensioning device bolt on the oil filter housing	*BA13.25-B-1001-01A
3	Install in reverse order

 Belt stretching device

Number	Designation		Engine 902.9; 904.9; 906.9	Engine 924.9; 926.9
BA13.25-B-1001-01A	Tensioning device bolt on the oil filter housing	Nm	50	50

Henviste dokumenter