ar1322s1202e
Remove/install poly-V belt
Type ar · emne 13.22 · version 0100 · 2014-01-22
Gælder for: MODEL 447 with ENGINE 651
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.22 Enkeltremstræk — Serie 447 · Serie 651
EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 447 · Serie 651
AR13.22-S-1202E
| Remove/install poly-V belt
| 17.12.2013
|
MODEL
| 447 with ENGINE 651
|
1
| Poly-V belt
|
2
| Tensioning device
|
| Remove/install
|
|
|
1
| Remove engine cover
|
| AR01.10-S-2405E
|
2
| Loosen poly-V belt (1)
|
|
|
| Pin for locking poly-V belt tensioning device
|
| WF58.50-S-1325-02S
|
|
|
| To do this push clamping device (2) downwards and lock in place.
|
|
3
| Remove poly-V belt (1)
| Installation:
Do not use belt wax or similar products.
This avoids malfunctions.
|
|
|
|
| Relieve the clamping device (2) for any further work. Check belt pulley profiles and tensioning device (2) for damage and dirt; replace if necessary
|
|
|
|
| Installation: Observe routing diagram of poly-V belt (1).
|
|
4
| Install in the reverse order
|
|
|
Henviste dokumenter
