ar1322s1202cb

Remove/install poly-V belt

Type ar · emne 13.22 · version 0101 · 2014-05-01

Gælder for: MODEL 415 with ENGINE 200

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.22 Enkeltremstræk — Serie 415

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 415

Gælder også for motorer/gearkasser: 200 ***

AR13.22-S-1202CB

Remove/install poly-V belt

29.04.2014

MODEL

415 with ENGINE 200

Remove/install poly-V belt

1

Poly-V-belt

2

Tensioning device

S13.22-4512-11

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Remove bottom engine compartment paneling

AR61.20-S-1105C

2

Remove right front section of fender liner

AR88.10-S-1310C

3

Loosen poly-V belt (1)

To do this move the clamping device (2) in the direction of the arrow.

4

Remove poly-V belt (1)

Installation:
Do not kink poly-V belt (1); do not use belt wax or any similar products.
Malfunctions and noises can arise otherwise.

Installation: Observe routing diagram of poly-V belt (1). Check correct seating of the poly-V belt (1).

Check

5

Check condition of the poly-V belt (1); replace poly-V belt (1) if necessary

AR13.22-S-1351C

6

Install in the reverse order

Henviste dokumenter