ar1322p1202sv

Remove, install poly V-belt

Type ar · emne 13.22 · version 0103 · 2006-05-02

Gælder for: ENGINE 112.947 in MODEL 170.465

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.22 Enkeltremstræk — Serie 170 (modeller 465)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 170 (modeller 465)

Gælder også for motorer/gearkasser: 112 947

AR13.22-P-1202SV

Remove, install poly V-belt

12.4.06

ENGINE 112.947 in MODEL 170.465

Remove, install poly V-belt

P13.22-2025-12

1 Poly-V-belt

2 Torx screw

3 Tensioning pulley

Remove

1

Loosen poly-V-belt (1) and remove

Swivel torx bolt (2) at tensioning pulley (3) in anti-clockwise direction for this step.

Lock the tension pulley with a pin or mandrel (diameter 5mm).

Check

2

Inspect belt pulley sections and tensioning device for damage and dirt

3

Check poly-V-belt (1)

Check poly-V-belt in visible area for wear

AP13.22-P-1352Z

Install

4

Fit on poly V-belt (1), tension

Begin in numerical order of the relevant running diagram with the tensioning pulley:

Layout diagram of poly-V-belt

AR13.22-P-3902-02B

Do not use belt wax or any similar products.

Henviste dokumenter