ar1322p1202ba

Remove, install poly V-belt

Type ar · emne 13.22 · version 0106 · 2006-05-02

Gælder for: ENGINE 112 in MODEL 202, 208.365 /465, 210, 220.063 /065 /067 /087 /163 /165 /167 /187 ENGINE 113 in MODEL 215.373 /375, 220.070 /073 /075 /083 /084 /170 /173 /175 /183 /184 /875 ENGINE 113.981 in MODEL 163.174 ENGINE 113.965 in MODEL 163.175 ENGINE 113.984 in MODEL 208.374 /474

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.22 Enkeltremstræk — Serie 163 (modeller 174, 175) · Serie 202 · Serie 208 (modeller 365, 374, 465, 474) · Serie 210 · Serie 215 (modeller 373, 375) · Serie 220 (modeller 063, 065, 067, 070, 073, 075, 083, 084, 087, 163, 165, 167, 170, 173, 175, 183, 184, 187, 875)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 163 (modeller 174, 175) · Serie 202 · Serie 208 (modeller 365, 374, 465, 474) · Serie 210 · Serie 215 (modeller 373, 375) · Serie 220 (modeller 063, 065, 067, 070, 073, 075, 083, 084, 087, 163, 165, 167, 170, 173, 175, 183, 184, 187, 875)

Gælder også for motorer/gearkasser: 112 ***, 113 ***, 113 965, 113 981, 113 984

AR13.22-P-1202BA

Remove, install poly V-belt

12.4.06

ENGINE 112 in MODEL 202, 208.365 /465, 210, 220.063 /065 /067 /087 /163 /165 /167 /187

ENGINE 113 in MODEL 215.373 /375, 220.070 /073 /075 /083 /084 /170 /173 /175 /183 /184 /875

ENGINE 113.981 in MODEL 163.174

ENGINE 113.965 in MODEL 163.175

ENGINE 113.984 in MODEL 208.374 /474

Remove, install poly V-belt

P13.22-2030-06

Shown on engine 112

1 Electric fan

2 Fan shroud

3 Poly-V-belt

4 Stud bolt

5 Tensioning pulley

Remove

1.1

Remove fan shroud (2) with electric fan (1)

For models 163.174/175 only.

AR20.40-P-5000GH

2

Loosen and remove the poly-V-belt (3)

For this step, swivel stud bolt (4) at tensioning pulley (5) in anti-clockwise direction Lock the tension pulley with a pin or mandrel (diameter 5mm).

External torx set

*001589760900

Check

3

Inspect belt pulley sections and tensioning device for damage and dirt

4

Check poly-V-belt (3)

Check poly-V-belt in visible area for wear

Engine 112, 113 except 113.965/981

AP13.22-P-1352Z

Engine 113.981/965 in model 163

AP13.22-P-1351GH

Install

5

Fit on poly-V-belt (3), then clamp

Do not use belt wax or any similar products.

Proceed by the numbered sequence of the respective belt routing pattern, starting with the tension pulley:

Routing diagram of poly V-belt

AR13.22-P-3902-02B

6.1

Install fan shroud (2) with electric fan

For models 163.174/175 only.

AR20.40-P-5000GH

Remove, install poly V-belt

001 589 76 09 00

External Torx set

Henviste dokumenter