ar1322d1202na

Remove/install poly-V belt

Type ar · emne 13.22 · version 0106 · 2012-02-16

Gælder for: ENGINES 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINES 612.981 in MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada ENGINES 612.981 in MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA ENGINES 612.981 in MODELS 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.22 Enkeltremstræk — Serie 903 (modeller 61*, 62*, 66*, 67*) · Serie 904 (modeller 61*, 62*, 66*)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 903 (modeller 61*, 62*, 66*, 67*) · Serie 904 (modeller 61*, 62*, 66*)

Gælder også for motorer/gearkasser: 612 981

AR13.22-D-1202NA

Remove/install poly-V belt

15.2.12

ENGINES 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINES 612.981 in MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINES 612.981 in MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINES 612.981 in MODELS 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Remove/install poly-V belt

D13.22-1101-06

1 Poly-V-belt

2 Tensioning device

3 Pin (dia. 4 mm)

4 Tensioner pulley

Removing

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground lead from battery

Notes on battery

AH54.10-P-0001-01A

2

Loosen poly-V-belt (1)

AR13.22-D-3902-01A

3

Remove poly-V-belt (1)

When carrying out further operations on the engine or timing case cover, relieve tensioning device (2).

Check belt pulley sections and tensioning device (2) for damage and dirt, replace if necessary.

Checking

4

Check poly-V-belt (1)

Check poly-V belt (1) for damage and traces of wear. Replace damaged poly-V belt (1).

Poly-V-belt length

*BE13.22-N-1001-01A

Damage profiles for a poly-V belt

AP13.22-D-1351-01A

Install

5

Fit on poly V-belt (1)

Fit on poly V-belt (1), beginning at the tensioner pulley. See:

Running diagram of poly-V belt (1)

AR13.22-D-3902-02A

6

Tension poly-V belt (1)

AR13.22-D-3902-04A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

7

Connect ground lead to battery

Notes on battery

AH54.10-P-0001-01A

8

Encode radio, set clock

Check values for single-belt drive

Number

Designation

Engine 612.981 with refrigerant compressor

Engine 612.981 without refrigerant compressor

BE13.22-N-1001-01A

Belt length

mm

2271

2196

Henviste dokumenter