ar1322b390205evi

Slacken, tension poly-V belt

Type ar · emne 13.22 · version 0100 · 2019-02-19

Gælder for: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.22 Enkeltremstræk — Serie 382 (modeller 155, 189) · Serie 936 (modeller 9**)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 382 (modeller 155, 189) · Serie 936 (modeller 9**)

AR13.22-B-3902-05EVI

Slacken, tension poly-V belt

Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Belt drive routing diagram

AR13.20-B-1000-01EVI

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Slacken, tension poly-V belt

Slacken

1

Fit the socket wrench and the handle (1) in the screw of the tensioning device (2), press it downward (arrow A), and keep pressed.



2

Insert a proper mandrel (3) 10 mm diameter in the hole of the tensioning device (2), and lock the tensioning device (2).



3

Remove the poly-V belt (4) from one pulley or from the inversion pulley.



4

Remove the socket wrench and the handle (1).


W13.22-1038-06

Stretch

5

Install the poly-V belt (4) on the pulley and on the inversion pulley.

Observe the assembly position of the poly-V belt (4).

6

Fit the socket wrench and the handle (1) in the screw of the tensioning device (2), press it downward (arrow A), and keep pressed.

7

Remove the mandrel (3) from the hole of the tensioning device (2), and move the tensioning device (2) back.

8

Remove the socket wrench and the handle (1).

Henviste dokumenter