ar1321t1201cb

Remove poly V-belt of coolant pump and generator, install

Type ar · emne 13.21 · version 0100 · 2005-07-12

Gælder for: ENGINE 457.944 in MODELNMB613.367

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.21 Flerremstræk — Serie 613 (modeller 367)

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 613 (modeller 367)

Gælder også for motorer/gearkasser: 457 944

AR13.21-T-1201CB

Remove poly V-belt of coolant pump and generator, install

18.3.03

ENGINE 457.944 in MODELNMB613.367

Remove poly V-belt of coolant pump and generator, install

T13.20-0028-11

1 Tensioning device

2 Poly-V belt

Remove/Install

Danger!

Lethal Hazard from being drawn into rotating vehicle parts

Do not reach into rotating parts.
Wear closed and snug-fitting work clothes.
Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

1

Open rear lid

2

Remove poly V-belt of refrigerant compressor of air conditioning system

AR13.21-T-1203CB

3

Push back tensioning device (1) and simultaneously remove poly-V-belt (2)

Push back tensioning device (1) via center bolt (arrow), at the same time do not slacken bolt.

Do not bend poly-V-belt (2), in order to avoid damage.

Inspect

4

Check poly-V-belt (2) for condition and damage, replace if necessary.

Damage patterns for poly V-belt

AP13.22-T-1351-01A

5

Install in the reverse order

Henviste dokumenter