T13.20-0020-11
1 Clamping screw
2 Lock nut
3 Adjusting screw
| Remove/install | ||
1 | Turn off ignition | ||
2 | Open the maintenance flap at the tail | ||
3 | Loosen the screws (1) and the lock nuts(2) | ||
4 | Turn the adjusting screw (3) and loosen the tensioning device | Installation: Check the V-belt, tension. | |
| Inspect condition of V-belt, re-tension | ||
5 | Detach the V-belt | ||
6 | Install in the reverse order |