ar1320p0002mnp

Remove/install tensioning device for poly-V belt of refrigerant compressor

Type ar · emne 13.20 · version 0100 · 2020-01-30

Gælder for: Engine 177 in model 167

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.20 Remtræk generelt — Serie 167 · Serie 177

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 167 · Serie 177

AR13.20-P-0002MNP

Remove/install tensioning device for poly-V belt of refrigerant compressor

24.10.2019

Engine

177 in model 167

Remove/install tensioning device for poly-V belt of refrigerant compressor

1

Poly-V-belt

2

Screw

3

Tensioning device

P13.20-A001-06

Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Remove charge air coolers.

AR09.41-P-6817MNP

2

Remove poly-V-belt (1).

AR13.21-P-0161MNP

3

Remove screws (2) and remove clamping device (3).

Bolt, belt tensioner to left bracket

*BA13.25-P-1001-01CA

Check

4

Check tensioning device (3) for damage.

If there is a problem,

Replace clamping device (3).

5

Install in the reverse order.

Belt tensioner

Number

Designation

Engine 177

BA13.25-P-1001-01CA

Bolt, belt tensioner to left bracket

Nm

20

Henviste dokumenter