Remove, install charge air pipe · ar0941w1311e · Mercedes-Benz WIS

AR09.41-W-1311E

Remove, install charge air pipe

27.9.06

ENGINE 457.9 in MODELS 374, 375, 940, 942, 943, 944, 958
Charge air pipe from turbocharger to charge air cooler

W09.41-1028-06

Shown on model 944

1 Charge air pipe

2 Clip

3 Turbocharger

4 Bolt

5 Clip

6 Charge air hose

7 Sealing ring

 	Remove/install
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to the end position and secure with the safety strut.	AS60.80-Z-0001-01A
1	Tilt cab
	Notes on tilting the cab		AH60.80-N-0003-01A
2	Remove soundproofing on frame above on the right
3	Detach charge air hose (6) on charge air pipe (1)	 Installation: Check condition of charge air hose (6) and clamp (5); replace if necessary.
			*BA09.41-N-1001-01K
4	Unscrew bolt (4)
5	Remove clamp (2) from charge air pipe (1) and exhaust gas turbocharger (3)	 Installation: Replace seal (7).
			*BA09.41-N-1006-01K
6	Remove charge air pipe (1)	 Clean sealing surfaces and seal off bores on turbocharger (3).
7	Install in the reverse order

 Charge air pipe/charge air cooling

Number	Designation		Engine 457.9


BA09.41-N-1001-01K	Clamp, charge air hose to charge air housing/charge air pipe and charge air cooler	Nm	7.5
BA09.41-N-1006-01K	Clamp, charge air pipe to turbocharger	Nm	10

ah6080n000301a Oplysninger om tipning af førerhus
as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes